HOME

REMOTES

REPAIR PARTS

NEW WIRELESS INTERCOMS

KEYLESS ENTRY

RESIDENTIAL, COMMERCIAL, AND GATE OPENER RECEIVERS

WALL CONTROLS

SPECIALTY REMOTE CONTROLS

TriCode®

NEW GARAGE BUTLER

Passport™

NEW UNIVERSAL LASER PARKING

RAIL EXTENSION KITS

SURGE PROTECTORS

HomeLink® Wireless Control System

LASER PARKING

GARAGE DOOR MONITOR

ACCESSORIES

CAR, HOME, GARAGE ACCESSORIES

CUSTOMER ASSISTANCE

SHIPPING INFO

ABOUT US

CODING INSTRUCTIONS

FAX or CHECK ORDERING

LINK TO US

SITE INDEX

Remote Controls 

Keyless Entry Systems

Wall Controls

Repair Parts

USPS Priority Mail $6.95 Orders are shipped same or next day!!!

LiftMaster and Chamberlain products carry the prestigious Good Housekeeping Seal.

390 MHz Frequency

61LM LiftMaster Garage Door Opener One-Button Dip Switch Remote Control Transmitter

• Operates One LiftMaster Chamberlain Sears Craftsman or Chamberlain Brand door opener.
• Works with openers manufactured between 1984-1992.
• 8 or 9 three position dip switches and 390 Frequency
• Battery, Visor Clip and Instructions included.
• Compatible with the following remote control model numbers:

CLICK HERE FOR CODING INSTRUCTIONS

62LM LiftMaster Garage Door Opener Two-Button Dip Switch Remote Control Transmitter

• Operates Two LiftMaster Chamberlain Sears Craftsman or Chamberlain Brand door openers.
• Works with openers manufactured between 1984-1992.
• 8 or 9 three position dip switches and 390 Frequency
• Battery, Visor Clip and Instructions included.
• Compatible with the following remote control model numbers

CLICK HERE FOR CODING INSTRUCTIONS

63LM LiftMaster Garage Door Opener Three-Button Dip Switch Remote Control Transmitter

• Operates Three LiftMaster Chamberlain Sears Craftsman or Chamberlain Brand door openers.
• Works with openers manufactured between 1984-1992.
• 8 or 9 three position dip switches and 390 Frequency
• Battery, Visor Clip and Instructions included.
• Compatible with the following remote control model numbers:

CLICK HERE FOR CODING INSTRUCTIONS

64LM LiftMaster Garage Door Opener Mini Three-Button Dip Switch Remote Control Transmitter

• Operates Three LiftMaster Chamberlain Sears Craftsman or Chamberlain Brand door openers.
• Works with openers manufactured between 1984-1992.
• 8 or 9 three position dip switches and 390 Frequency
• Battery, Stick Tape and Instructions included.
• Compatible with the following remote control model numbers:

CLICK HERE FOR CODING INSTRUCTIONS

66LM LiftMaster Garage Door Opener Billion Code Keyless Entry System

• Compatible with LiftMaster Chamberlain Sears Craftsman and Chamberlain Brand  Smart Billion Code door openers ONLY. 390 Frequency
• Works with openers manufactured between 1993-1997.
• Battery operated, NO wiring required.
• Lighted Keyboard and Flip-Up cover.
• Battery, Screws and Instructions included.
• Compatible with the following remote control model numbers:
• Will ONLY work with openers manufactured since 1990 that have a yellow, white, gray, or green "learn" button on receiver board.

CLICK HERE FOR CODING INSTRUCTIONS

65LM LiftMaster Garage Door Opener Hard-Wired Keyless Entry System

• This keyless entry system consists of a keyboard and a console. The keyboard sends a coded signal from outside the garage. The console fastens to an inside garage wall. It receives the 4-digit programmed coded signal and starts the door opener.

• 10,000 possible combinations. Code can be changed easily if desired.

• The user has 10 seconds from the time the first number is pressed to enter the 4-digit code.

• If incorrect numbers are accidentally pressed, a 5 second interval is necessary before staring over.

• Operates from the garage door opener power with a battery back-up for code memory and lighted keyboard. Unit will not operate without battery.

• Simple to install in 5 easy steps.

• Provides an additional push button control to operate door from inside garage.

• The garage door can be operated after a valid code entry by pressing ANY single key AS LONG AS THE KEYBOARD LIGHT REMAINS ON.

• Keyboard illuminates and remains lit for 10 seconds when ANY number is pressed. In darkness this feature allows user to press ANY number before entering the 4-digit code. 

• IMPORTANT: Some garage door openers have a third screw terminal which supplies power to the radio control. This terminal can be connected to terminal No. 3 on the console with a third strand of bell wire (not supplied).

• With ANY garage door opener made by Stanley, accessory Transformer 95LM (which is found below)  must be installed.

• Lighted Keyboard and Flip-Up cover.
• Battery, Wire, Mounting Clips and Instructions included.

***IMPORTANT:  There are certain compatibility discrepancies that the manufacturer claims with this keyless entry. With that in mind, we strongly suggest that you purchase and use the 95LM Transformer found below.

CLICK HERE FOR CODING INSTRUCTIONS

95LM LiftMaster Plug-In AC 24-Volt Transformer Power Supply

• Accessory for the 65LM hard wired keyless.
• If your garage door opener has only 2 terminal connectors and no external 24-volt power supply, then this transformer is needed.
• For use with all types of add-on wire-in gate and garage door opener receivers.
• Plugs into standard 120-volt outlet.

LiftMaster Garage Door Opener Remote Control Visor Clip

• Visor Clip for remote controls model number in the 60 and 80 series.
• Model Numbers 61LM, 62LM, 63LM, 81LM, 82LM, 83LM

LiftMaster Garage Door Opener Battery

• 12 Volt Battery for remote control model numbers in the 60 & 80 series.
• 12 Volt Battery for keyless entry model number 66LM.
• Model Numbers 61LM, 62LM, 63LM, 64LM, 81LM, 82LM, 83LM

LiftMaster Garage Door Opener Battery

• 9 Volt Battery for Keyless Entry System model 976LM, 376LM, 377LM, 65LM Keyless Entry Systems